Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 48,055 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 14,355 part numbers: Motion Control Products     GLEASON 17,992 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 3,208 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 916 part numbers: Electrical Control Products   HUBBELL 8,396 part numbers: Electrical Control Products   SUPERBOLT 122 part numbers: Fastening Solutions   RENOLD 406 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.gleasondirect.com	Email: sales@gleasondirect.com	Phone: (888) 861-8777

 
 

Cable Management: Pre-Engineered Products: Slip Rings

Gleason Rota-Power 35 Slip Rings     35 Amp, 600 volt   Gleason Rota-Power 35 Slip Rings Information   35 AMP Rota-Power Slip-Rings No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 GRD-RP035-02 Gleason Hubbell Slip Ring Assembly  Part RP035-02  Rota-Power 35 Slip Ring  A Completely Self Contained Collector Ring Assembly  35 AMP Continuous Duty  2 Independent Circuits / Conductors  600 Volts Maximum  4.88 Inches Long though 3 Inches should be allowed / added for the wire leads  Slip Ring Mounts on a 2 inch diameter customer supplied pipe / tube which slides 3/4 Inch into the slip ring  Secured / Fixed by Two 0.25-20 Set Screws in the Slip Ring Collar and a # 91 Woodruff Key which are all supplied  The balance of the slip ring has a 1.87 inch bore for the conductors to go through  The slip ring is to be held stationary or turn via a customer supplied 1/2 inch diameter pin  Ships in 10 Days, WI 53050  Dated 06-2021 0 $498.05 2 GRD-RP035-03 Gleason Hubbell Slip Ring Assembly RP  Part RP035-03  Rota-Power Series 35 Slip Ring  A Completely Self Contained Ring Assembly  35 AMP Continuous Duty  3 Independent Circuits / Conductors  600 Volts Maximum  4.88 Inches Long though 3 Inches should be allowed / added for the wire leads  Slip Ring Mounts on a 2 inch diameter customer supplied pipe / tube which slides 3/4 Inch into the slip ring  Secured / Fixed by Two 0.25-20 Set Screws in the Slip Ring Collar and a # 91 Woodruff Key which are all supplied  The balance of the slip ring has a 1.87 inch bore for the conductors to go through  The slip ring is to be held stationary or turn via a customer supplied 1/2 inch diameter pin  Ships in 5 Days, WI 53050  Dated 07-2023 1 $678.80 3 GRD-RP035-04 Gleason Hubbell Slip Ring Assembly  Part RP035-04  Rota-Power 35 Slip a Completely Self Contained Ring Assembly  35 AMP Continuous Duty  4 Independent Circuits / Conductors  600 Volts Maximum  4.88 Inches Long though 3 Inches should be allowed / added for the wire leads  Slip Ring Mounts on a 2 inch diameter customer supplied pipe / tube which slides 3/4 Inch into the slip ring  Secured / Fixed by Two 0.25-20 Set Screws in the Slip Ring Collar and a # 91 Woodruff Key which are all supplied  The balance of the slip ring has a 1.87 inch bore for the conductors to go through  The slip ring is to be held stationary or turn via a customer supplied 1/2 inch diameter pin  4 Circuit Ampacity should be derated  Values quoted based on # 12 AWG Wire Leads which are supplied  Ships in 10 Days, WI 53050  Dated 06-2021 1 $1,905.95 4 GRD-RP035-06 Gleason Hubbell Slip Ring Assembly  Part RP035-06  Rota-Power 35 is a Completely Self Contained Ring Assembly  35 AMP Continuous Duty  6 Independent Circuits / Conductors  600 Volts Maximum  7.38 Inches Long though 3 Inches should be allowed / added for the wire leads  Slip Ring Mounts on a 2 inch diameter customer supplied pipe / tube which slides 3/4 Inch into the slip ring  Secured / Fixed by Two 0.25-20 Set Screws in the Slip Ring Collar and a # 91 Woodruff Key which are all supplied  The balance of the slip ring has a 1.87 inch bore for the conductors to go through  The slip ring is to be held stationary or turn via a customer supplied 1/2 inch diameter pin  6 Circuit Ampacity should be derated by 20%  Values quoted based on # 12 AWG Wire Leads which are supplied  Ships in 10 Days  Dated 06-2021 1 $902.79 5 GRD-RP035-08 Gleason Hubbell Slip Ring Assembly  Part RP035-08  Rota-Power 35 Slip a Completely Self Contained Ring Assembly  35 AMP Continuous Duty  8 Independent Circuits - Conductors  600 Volts Maximum  7.38 Inches Long though 3 Inches should be allowed / added for the wire leads  Slip Ring Mounts on a 2 inch diameter customer supplied pipe / tube which slides 3/4 Inch into the slip ring  Secured / Fixed by Two 0.25-20 Set Screws in the Slip Ring Collar and a # 91 Woodruff Key which are all supplied  The balance of the slip ring has a 1.87 inch bore for the conductors to go through  The slip ring is to be held stationary or turn via a customer supplied 1/2 inch diameter pin  8 Circuit Ampacity should be derated by 30%  Values quoted based on # 12 AWG Wire Leads which are supplied  Ships in 10 Days, WI 53050  Dated 08-2023 2 $1,367.37 6 GRD-RP035-12 Gleason Slip Ring Assembly  Rota-Power 35 Slip a Completely Self Contained Ring Assembly  35 AMP Continuous Duty  12 Independent Circuits / Conductors  600 Volts Maximum  9.88 Inches Long though 3 Inches should be allowed / added for the wire leads  Slip Ring Mounts on a 2 inch diameter customer supplied pipe / tube which slides 3/4 Inch into the slip ring  Secured / Fixed by Two 0.25-20 Set Screws in the Slip Ring Collar and a # 91 Woodruff Key which are all supplied  The balance of the slip ring has a 1.87 inch bore for the conductors to go through  The slip ring is to be held stationary or turn via a customer supplied 1/2 inch diameter pin  12 Circuit Ampacity should be derated  Values quoted based on # 12 AWG Wire Leads which are supplied  06-2021 0 $2,127.61 7 GRD-RP035-14 Gleason Slip Ring Assembly  Part GRD-RP035-14  Rota-Power 35 Slip a Completely Self Contained Ring Assembly  35 AMP Continuous Duty  14 Independent Circuits / Conductors  600 Volts Maximum  12.38 Inches Long though 3 Inches should be allowed / added for the wire leads  Slip Ring Mounts on a 2 inch diameter customer supplied pipe / tube which slides 3/4 Inch into the slip ring  Secured / Fixed by Two 0.25-20 Set Screws in the Slip Ring Collar and a # 91 Woodruff Key which are all supplied  The balance of the slip ring has a 1.87 inch bore for the conductors to go through  The slip ring is to be held stationary or turn via a customer supplied 1/2 inch diameter pin  14 Circuit Ampacity should be derated  Values quoted based on # 12 AWG Wire Leads which are supplied  06-2021 0 $1,765.93 8 GRD-RP035-20 Gleason Slip Ring Assembly  Rota-Power 35 Slip a Completely Self Contained Ring Assembly  35 AMP Continuous Duty  20 Independent Circuits / Conductors  600 Volts Maximum  15.88 Inches Long though 3 Inches should be allowed / added for the wire leads  Slip Ring Mounts on a 2 inch diameter customer supplied pipe / tube which slides 3/4 Inch into the slip ring  Secured / Fixed by Two 0.25-20 Set Screws in the Slip Ring Collar and a # 91 Woodruff Key which are all supplied  The balance of the slip ring has a 1.87 inch bore for the conductors to go through  The slip ring is to be held stationary or turn via a customer supplied 1/2 inch diameter pin  20 Circuit Ampacity should be derated  Values quoted based on # 12 AWG Wire Leads which are supplied  06-2021 0 $2,343.30 9 GRD-RP035-36 Gleason Hubbell Slip Ring Assembly  Rota-Power 35 Slip a Completely Self Contained Ring Assembly  35 AMP Continuous Duty  36 Independent Circuits / Conductors  600 Volts Maximum  25.82 Inches Long though 3 Inches should be allowed / added for the wire leads  Slip Ring Mounts on a 2 inch diameter customer supplied pipe / tube which slides 3/4 Inch into the slip ring  Secured / Fixed by Two 0.25-20 Set Screws in the Slip Ring Collar and a # 91 Woodruff Key which are all supplied  The balance of the slip ring has a 1.87 inch bore for the conductors to go through  The slip ring is to be held stationary or turn via a customer supplied 1/2 inch diameter pin  36 Circuit Ampacity should be derated  Values quoted based on # 12 AWG Wire Leads which are supplied  Dated 06-2021 0 $3,884.11 35 AMP Rota-Power Slip-Rings in Enclosure No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 GRD-ERP35-04 Gleason Hubbell Enclosed Rota-Power Slip Ring Assembly  Part ERP35-04  aka GR013705  NEMA 4 Enclosure  Water Resistant & Dust Tight  Qty 4 Circuits  Each rated at 35 AMPS  4 to 6 Circuits Derated to 28 AMPS  600 Volts Maximum  125 RPM Maximum  Overall Length 12 Inches - 305mm  2 Electrical Entrances, 1.25 Inch Female NPT  The Mounting Shaft is 1.75 Inches in Diameter  The unit can be mounted in any position vertical or horizontal.  Finish is a Baked on Orange Polyester  3 Inch Lead Wires from the rings are provided  Along with a Terminal Block for the side electrical entrance.  Strip Heaters should be considered for outdoor applications to reduce humidity  Ships in 10 Days, WI 53050  Dated 06/01/21  (25LBS) H 14" L 12" W 12" Box 0 $2,245.00 2 GRD-ERP35-08 Gleason Hubbell Enclosed Rota-Power Slip Ring Assembly   Part ERPA35-08  aka GR013707  NEMA 4 Enclosure  Water Resistant & Dust Tight  Qty 8 Circuits  Each rated at 35 AMPS  With 4 to 6 Circuits Derated to 28 AMPS  600 Volts Maximum  125 RPM Maximum  Overall Length 14.5 Inches - 369mm  2 Electrical Entrances, 1.25 Inch Female NPT  The Mounting Shaft is 1.75 Inches in Diameter  The unit can be mounted in any position vertical or horizontal.  Finish is a Baked on Orange Polyester  3 Inch Lead Wires from the rings are provided  Along with a Terminal Block for the side electrical entrance.  Strip Heaters should be considered for outdoor applications to reduce humidity  Ships in 10 Days, WI 53050  Dated 08-2023  (20LBS) H 16" L 12" W 12" Box 0 $2,966.32 3 GRD-ERP35-10 Gleason Hubbell Enclosed Rota-Power Slip Ring   Part ERP35-10  aka GR013708  Assembly. NEMA 4 Enclosure. Weatherproof / Water & Dust Tight, Circuits / Conductors rated at 35 AMPS Each. 10 Circuits / Conductors, 600 Volt, 125 RPM, Overall Length 19.81 Inches, 2 Electrical Entrances a 1.25 Inch Female NPT. The Mounting Shaft is 1.75 Inches in Diameter and the unit can be mounted in any position vertical or horizontal. Finish is a Baked on Orange Polyester. 3 Inch Lead Wires from the rings are provided along with a Terminal Block for the side electrical entrance. Strip Heaters should be considered for outdoor applications that have electrical in-activity allowing condensation to accumulate. 8 Circuit Ampacity should be derated by 30%   Ships in 10 work days, WI 53050  Dated 06-01-2021 0 $2,980.00 4 GRD-ERP35-24 Gleason Enclosed Rota-Power Slip Ring Assembly. NEMA 4 Enclosure. Weatherproof / Water & Dust Tight, Circuits / Conductors rated at 35 AMPS Each. 10 Circuits / Conductors, 600 Volt, 125 RPM, Overall Length 27.31 Inches, 2 Electrical Entrances a 1.25 Inch Female NPT. The Mounting Shaft is 1.75 Inches in Diameter and the unit can be mounted in any position vertical or horizontal. Finish is a Baked on Orange Polyester. 3 Inch Lead Wires from the rings are provided along with a Terminal Block for the side electrical entrance. Strip Heaters should be considered for outdoor applications that have electrical in-activity allowing condensation to accumulate. 24 Circuit Ampacity should be derated by 30% 0 $3,529.53 Secure Online Order     Secure Online Order   17,992 part numbers available for online order   Shopping Cart Empty Checkout is secure   Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)   Web Site Features   Part Number Lookup   Enter at least three characters of a Gleason part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time. Engineered Products   Gleason Engineered Products     • Cable Reels:     • Cable-Master Reels     • Series "S" & "WB" Reels     • Series "MMD" & "SM" Reels     • Series "SHO" & "TMR" Reels     • Welding Cable Reels     • Low Profile Level Wind Reels     • Vari-Matic Drive Reels     • Motor-Driven Pendant Station       Reels     • Emergency Vehicle Reels     • Series "SZ" Reels     • Main Spring Assemblies     • Cable Reel Roller Guides     • Heavy Duty Reeling Systems   • Festoon Systems:     • Series Track Master     • Series Beam Master     • Series I-132     • Series PDQ 300 I-Beam     • Series PDQ 450 & 700 I-Beam     • Series RTG 450 & 700 I-Beam     • Series T-50 Curved Rail   • Hose Reels:     • Hose Reels   • PowerTrak Drag Chains:     • PowerTube     • Type "GRP" Molded Nylon     • Type "E" & "EF" Steel Link     • Type "G" Nylon & Aluminum   • Conductor Bar, Electrification:     • Conductor Bar, Electrification   • Slip Ring Assemblies:     • Compact & Rota-Power     • Compact 30 Amp & 55 Amp     • Compact 30 Amp (DR)     • Rota-Power 35 Amp     • Rota-Power 75 Amp     • Rota-Power 125 Amp     • Rota-Power 200 Amp Pre-Engineered Products   Gleason Pre-Engineered Products     • Catalog:     • Products Catalog   • Cable Reels:     • "A" Cast Aluminum Reels     • "ER" Hoist Reels     • "G" Heavy Duty Cable Reels   • Cord Reels:     • Compact Cord Reels     • Industrial Duty Cord Reels     • Outlets, Lamps & Receptacles     • CAT6 Data Reels   • Festoon Kits & Components:     • Wire Rope, Nylon, Cable/Hose     • Wire Rope, Nylon, Flat Cables     • Wire Rope, Steel, Flat Cables     • Optional Components     • C-Rail C25, Components     • C-Rail C35, Flat Cable     • C-Rail C35, Round Cable     • C-Rail C35, Components     • T-Track Heavy Duty     • Kellems Cord Grips     • Kellems Support Grips     • NEMA 12 Electrical Boxes     • Cable Connectors     • Universal Cable Grips     • Festoon Cable     • Adjustable Beam Trolleys     • Festoon Pendants   • Hose Reels:     • "GHA" Industrial Duty Reels     • "EZ" Pull Heavy Duty Reels     • "HC" Heavy Duty Reels     • "EZ9" Clean Air Reels     • "HH" Hand Crank Reels     • "UH" Universal Reels   • PowerTrak Kits:     • PowerTrak Kits   • Limit Switches, Geared Rotary:     • 54 Series     • 55 Series, NEMA 4     • 55 Series, NEMA 7   • Static Discharge Products:     • Cable & Accessories     • Static Discharge Reels   • Tool Balancer Reels:     • Accessories     • Tool Balancer Reels   Workplace Solutions   Hubbell Workplace Solutions     • Booms and Jibs   • Mobile Carts   • Qualtech Computer Enclosures   • Qualtech Document Stands   • Tool Balancers   • Workstations   • Complete List & Catalog   • Hubbell WS Idea Sheets   • WS Replacement Parts Gleason Replacement Parts   Gleason Replacement Parts     • PowerTrak Replacement Parts     • Reel Replacement Parts Entertainment Solutions   Gleason Entertainment Solutions   From performing arts and concerts to studio and television, Gleason Reel has the right products for the right application. These events typically include a variety of learning and entertainment activities, performances, plays and general assemblies, or large-scale seminars, theatre productions and award ceremonies. These spaces must accommodate the latest audio, visual, and lighting technology while providing maximum reliability to ensure that the show goes on.       • Entertainment Products Guide Manuals and Information   Gleason Manuals and Information     • Manuals and Information   This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9 Supplier of Industrial Brake Parts Since 1985 This web site: Owned and operated by Brake Products, Inc. Designed and maintaned by Internet and Database Software, Inc.