Hubbell Workstation Accessories
WORK LIGHTS AND POWER BARS
POWER-UP... AND PUT SOME LIGHT ON THE SUBJECT
Here are fitting touches to your workplace... a fluorescent, overhead work light and a power bar. Both are custom designed for use on Workplace Solutions workstations.
ADJUSTABLE FOOT REST, EASY ON THE LEGS
Seated or standing, your workers can be more productive and more comfortable when a foot rest is used. Fully adjustable and strong enough for heavy industrial applications, it's constructed of steel with extruded aluminum foot bar. Standard model measures 29" wide, 12.75" deep and 12.25" high.
MANIFOLD WITH BRACKETS
BIN BAR WITH BRACKETS
SHELVES WITH BRACKETS
Hubbell Workstation Accessories Information
Hubbell Workstation Components
For loads up to 50 lbs. (22.5 kg). Extruded aluminum rail features double tracks (top and bottom), one for trolleys
and the other for mounting components or concealing hose or cable. In addition, there is a full assortment of
construction brackets designed specifically for aluminum rail. For information on additional assembly brackets,
download "Steel Track-50 lb" page below.
STEEL TRACK, 30 lb.
For loads up to 30 lbs. (13.5 kg). Separate TOOL RAIL COMPONENTS allow you to quickly and inexpensively build your
own work stations, retrofit existing stations or customize a kit.
STEEL TRACK, 50 lb.
For loads up to 50 lbs. (22.5 kg). Separate TOOL RAIL COMPONENTS allow you to quickly and inexpensively build your
own work stations, retrofit existing stations or customize a kit. Most components also fit WA-50 aluminum track.
Hubbell Workstation Kits
UPDATE YOUR EXISTING BENCH
Easily, quickly, inexpensively retrofit old "beaters" as well as new benches.
Hubbell Workplace Solutions kits contain everything needed to assemble ergonomically sound
fixed workstations or mobile productivity boosters.
SINGLE COLUMN KITS are the efficient and economical way to meet ergonomic requirements.
Each kit is complete with 180 degree swing or fixed boom, safety hook or balancer trolley
and Universal Bracket for mounting everything from an air line fitting to peg board.
DUAL COLUMN WORKSTATION KITS include two straight or one curved tool rail, your choice of
three mounting base styles and in a range of heights to fit virtually any bench and any
task you have.
Hubbell Workstation Kits Information
Hubbell Workstation Swing Arms
Make your workplace user friendly. Available with Document Stand, Bin Rack, Computer Stand and other attachments.
Swing arms can be added to existing workstations or benches. Column mounts clamp on any WS50 or similar vertical
column. Bench mount can be bolted to any level surface. Arms, elbows and attachments slide together and can be
adjusted to provide maximum worker efficiency...least worker strain. Black baked polyester finish (boards natural,
beige or white as shown). Max capacity 30 lbs.(13.5 kg), arm alone or arm and elbow together. Use of three or more
arms or elbows on one mount reduces capacity and is not recommended. Swing arms, elbows and attachments include
adjustable drag brakes. Installation hardware included with column mounts.
Hubbell Workstation Swing Arms Information
Hubbell Workstation Special Applications
250 lb. CAPACITY RAIL
FOR THOSE HEAVY DUTY APPLICATIONS
Designed for large air tool balancers, these tool rail kits are similar to our W3F and W5F tool support kits
but much heavier. Must be supported every 6 ft.(1.8m) minimum to maintain full rated capacity.
RAIL & HANGER KITS
The basic tool rail is the key component on which
all accessories hang.
Maximum 250 lb.(113kg) safe load rating.
Galvanized for maximum corrosion protection.
Available in 6, 12 and 18 ft. (1.8, 3.6, 5.4m) lengths.
May be joined for any length.
Can be mounted on walls, benches, floors, booms,
HEAVY DUTY TOOL CRANES 50 lb. or 250 lb. CAPACITY Rugged bridge crane design concept allows overhead tool
handling with maximum safety and minimum cost. Uses proven components rolling in standard WS-50 or WS-60
(steel) or WA-50 (aluminum) rails. 250 lb. capacity unit features doubled tool rail for maximum strength
on spans over 6'. To speed installation, trolleys, hangers and tool track bridge are pre-assembled into
single units, as is tool rail. Balance reel and tool not included.
CURVED RAIL COMPONENTS
GUIDE TOOLS AND CONTROLS AROUND CORNERS
Unique diamond rail track and matching trolleys allow tools or control boxes to follow assembly line or
conveyor path. Curved sections with 3 ft. (0.9m) radius form 90o corner and connect to other
curved or straight track sections for smooth, nonstop trolley movement. Design and build your own system
from components shown below. Threaded hangers may be hung from overhead beams or from WS50 rail using
standard track nut. Trolleys include safety flanges to prevent fall if rollers fail.
Hubbell Workstation Special Applications Information
Hubbell Workstation Torque Arms & Tool Positioners
TORQ-ARMTM FOR ASSEMBLY TOOLS
Take a step towards OSHA Ergonomics standard compliance by fitting workstations with Torq-ArmTM Torque
Neutralizing arms and Tool Positioners. Available for either air or electric tools. Light weight anodized aluminum
arms support weight of tool and allow easy positioning while preventing transmission of rotational forces to worker's
hands or wrists. Units include tool balancer, telescoping positioning arms and rolling trolley for mounting in lateral
tool rail on workstation or on bench mounted jib with swing boom (jib included). Electric tool models feature secure
tool clamp which may also be used for electric or air powered pistol grip tool. Air tool models feature a U-joint
manifold which supplies air to tool and allows vertical and horizontal tool positioning. Tool Positioners feature
adjustable tension to support air or electric powered tools from one to seven pounds. Positioners reach 12" to
25.5" from base to pivot point.
Hubbell Workstation Torque Arms & Tool Positioners Information